V Drone Tech

FlySky FS-GR3E 2.4G 3CH Receiver is all new function with waterproof protection RC receiver, so now you could also enjoy your rc world when raining or moisture day.

The receiver is compatible with many transmitters like FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S.  This 3 Channel receiver is very easy to bind very fast link-up, strong signal distance.

Also check our wide range of  flight controllers , Drone transmitter and receiver and other good quality drone parts .

The FS-TH9X 2.4GHz 9-Channel Transmitter with FS-R9B Receiver is revolutionizing the way people experience RC, and this radio transmitter and receiver is unique against the top competition. can maintain its position. Equipped with FS-RM002 2.4GHz module TRANSMITTER’S AFHDS (Automatic Frequency Hopping Digital System), this his 9 channel is developed by his FLYSKY for all radio control model enthusiasts and can be used at home by his his Patented by FLYSKY. It was  Specially designed for all radio-controlled models, the system features super active and passive his anti-jamming capabilities, ultra-low power consumption, and high receiver sensitivity. Due to extremely rigorous testing by our engineers and years of market observation, FLYSKY AFHDS is currently considered his one of the best systems on the market.

2.4 GHz is the standard for the new generation of wireless systems due to its many advantages. Transmitters operating at 2.4 GHz are outside the frequency range of “noise” produced by other helicopter electronics. This can affect legacy frequency systems.

Note : The difference between FS-TH9X 2.4GHz 9CH Upgrade Transmitter (with FS-IA10B Receiver) and FS-TH9X 2.4GHz 9CH Transmitter (with FS-R9B Receiver) is only for receiver channels

RX (Receiver) TX (Transmitter) Present:
Insert bind plug into BAT and power on aircraft/heli

The LED light should blink (check RX on ESC)

Power off the aircraft/heli, remove the bind plug, and power off the TX

Power on the TX, then power on the Airplane/Helicopter

Also check our wide range of  flight controllers , Drone transmitter and receiver and other good quality drone parts .

1. Transmitter: FS-TH9X  with FS-RM002 2.4GHz Module
2. Receiver: FS-R9B
3. Bidirectional System
4. Frequencies-Hopping
5. Omni-directional High Gain Antenna
6. Low Power Consumption

1. Brand Name: FlySky
2. Item Name: RC Receiver
3. Channels: 8channels
4. Receiving Sensitivity: -105dBm
5. Frequency Range: 2.4-2.48GHz
6. Frequency Width: 500KHz
7. Wave Band: 160
8. Modulation: GFSK
9. 2.4G Mode: Automatic FM digital system
10. Channel Resolution: 1024 classes
11. Power: 4.0-6.55V DC
12. Weight: 18g
13. Antenna Length: 26mm
14. Color: Black
15. Certificate: CE,FCC

1. Brand Name: FlySky
2. Item Name: FS-TH9X 2.4G 9CH
3. Channels: 9 Channels
4. Model Type: quadcopter, glider, helicopter, airplane, also car or boat
5. Bandwidth: 500Hz
6. Band: 160
7. 2.4G System: AFHDS
8. Low Voltage Warning: yes(less than 9V)
9. Charger Port: yes
10. Size: 180 x 220 x 70 mm
11. Weight: 670g
12. Control Range: 700m

The transmitter functions:

1. Throttle curves
2. Pitch curves
3. Endpoint adjustments
4. Subtrim
5. Swash AFR mixes
6. Servo reversing
7. Timer
8. Dual rate
9. Exponential
10. Flaperons
11. V-Tail mixing
12. Elevons

Orange Pi Zero is the perfect substitute for Raspberry pi Zero.
We can use Orange pi hassle free to make our products well.

1. Transmitter: FS-i6X (6 Channels)
2. Receiver: FS-iA10B (10 Channels)
3. RF Range: 2.408-2.475 GHz
4. RF Power : < 20 dBm
5. RF Channel: 135
6. Bandwidth: 500 kHz
7. Total Weight: 392 gm
8. Power: 6V DC 1.5A

Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an aircraft or multirotor that is being remotely controlled. and Flysky is one of the popular brands that only manufactures a Diverse Range of  Transmitters and Receivers at a reasonable price.

The AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) developed and presented by Flysky is specially developed for all radio control models. Offering superior protection against interference while maintaining lower power consumption and high reliable receiver sensitivity

FrSky Transmitter and Receiver is gaining so much popularity due to its originality and compatibility in high-end drone projects.

1. 10 channel 2.4GHz radio with telemetry capability
2. Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology
3. Transmitters come pre-bound to the receiver
4. Multiple control switches including a 3-pos switch and two potentiometers
5. Easy to use and program
6. 20 model memory
7. Trainer port
8. Backlit LCD screen displays real-time transmitter and receiver voltage

1. Item: FS-i6X RC Transmitter
2. Tx Channel: 6
3. Model Type: Fixed-Wing/Glider/Helicopter
4. RF Range: 2.408-2.475GHz
5. RF Power : < 20dBm
6. RF Channel: 135
7. Bandwidth : 500KHz
8. 2.4GHz System : AFHDS 2A / AFDHS
9. Modulation Type: GFSK
10. Stick Resolution: 4096
11. Low Voltage Warning: < 4.2V
12. DSC port: PS/2 Port PPM
13. Chargeable: No
14. Antenna Length: 26mm (Dual Antenna)
15. Weight: 392g
16. Power : 6V DC 1.5A
17. Display: STN Transflective Display, LCD 128×64 Lattice, VA 73x39mm, LCD with white backlight
18. Size : 174 x 89 x 190 mm
19. Online Update: Yes
20. Color: Black
21. Certificate: CE0678, FCC

1. Rx Channels: 10
2. Suitable models: Airplane / glider / helicopter Health
3. Frequency range :2.4-2 .48 GHz
4. Transmitting power: not more than 20dBm
5. Receiver sensitivity:-105dBm
6. 2.4G modes: automatic frequency second generation digital system
7. Encoding: GFSK
8. Antenna length: 26 mm * 2 (dual antenna)
9. Weight: 19.3 g
10. Input power :4.0-6 .5 V DC
11. Dimensions: 47 x 33.1 x 14.7 mm
12. Color: Black
13. Certification: CE0678, FCC
14. i-BUS Interface: Yes
15. Data acquisition interface: Yes
16. Color: Black.
17. Model Type : Airplane / Glider / Helicopter
18. Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G

1 x  Fly sky FS-i6X 6CH 2.4GHz AFHDS 2A RC Transmitter.
1 x FS-iA10B 2.4GHz 10CH Receiver with Binding cable.
1 x PS2 to USB Update Cable.
1 x User Manual.

1. Operating Voltage (VDC):4.2 ~ 6.0
2. No. of Channels:10
3. Antenna Length (mm):26
4. Certificate:CE0678, FCC
5. Charging Port: No
6. RF Power:Less Than 20 dbm
7. Code Type:Digital
8. Color:silver

The FlySky FS-i6S Remote Control 2.4G 10CH AFHDS Transmitter with FS-IA10B Receiver’s new-look design comes with some exciting new features. This radio incorporates a monochrome backlite LCD touchscreen making it easy to program and make changes in sunlight or at night.

There are two internal dual omnidirectional high gain antennas (for more reliability) built inside the frame so they can’t be damaged in transit. To help control your aircraft there are lots of programmable switches, buttons, and scroll wheels. Making them great for setting up flight modes and the scroll wheels could be used for controlling camera gimbals.

The Premium design and look make you feel the class of product and easy access to buttons in the right position and smooth operation and controls. All switches and scroll wheels are in easy reach and the adjustable length sticks can be set for comfortable use.  There is a loop for attaching a neck strap and a phone/monitor holder mounting point. There is even a mini USB port for easy connection to your PC for updates or for connecting (via USB) to your favorite simulator programs.

Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other

1. Full touchscreen interface: More convenient and faster to control Bidirectional Communication
2. Capable of sending and receiving data: Each transmitter is capable of receiving data from temperature, altitude, and many other types of sensors, servo calibration, and i-BUS Support.
3. Multi-channel Hopping Frequency: This system’s width ranges from 2.4055GHz to 2.475GHz. This is divided into 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
4. Omni-directional Gain Antenna: The high efficiency Omni-directional high gain antenna cuts down on interference while using less power and maintaining a strong reliable connection.

1. Brand Name: FlySky
2. Item Name: FS-i6s transmitter
3. Channel: 10
4. Model Type: Quadcopter
5. Channel resolution: 4096 steps
6. Low voltage warning: less than 4.2v
7. ANT length: 26 x 2mm( dual antenna)
8. Weight: 576g(With mobile Holder)
9. Battery: 6v 1.5 AA x 4(not included)
10. Size: 179 x 81 x 161mm
11. Color: Silver
12. Certificate: CE ,FCC
13. RF specification:
14. RF Range: 2.405 – 2.475GHz
15. Bandwidth: 500khz
16. RF Power: less than 20dBm
17. RF mode: AFHDS 2A
18. Modulation type: GFSK
19. RX Sensibility: -105dBm

1. Brand Name: Flysky
2. Item Name: FS-IA10B Receiver
3. Number of Channels: 10
4. Suitable models: Airplane / glider / helicopter Health
5. Frequency range :2.4-2 .48 GHz
6. Number of newspapers: 160
7. Transmitting power: not more than 20dBm
8. Receiver sensitivity:-105dBm
9. 2.4G modes: automatic frequency second generation digital system
10. Encoding: GFSK
11. Antenna length: 26 mm * 2 (dual antenna)
12. Weight: 19.3 g
13. Input power :4.0~6 .5 V DC
14. Dimensions: 47  x 33.1 x 14.7 mm
15. Color: Black
16. Certification: CE0678, FCC
17. i-BUS Interface: Yes
18. Data acquisition interface: Yes

1 x FS-i6S Remote Control 2.4G 10CH AFHDS Transmitter

1 x FS-IA10B Receiver

1 x Detachable Mobile/Tablet Holder

1 x USB Cable

1 x User Manual

1. Model Type: Digital Radio Transceiver.
2. Sensitivity: 1024.
3. Bandwidth: 500 kHz.
4. Default Operating Mode: Mode 2 (Left-Hand Throttle).
5. No. of Channels: 6.
6. Operating Voltage: 12V DC (1.5AA x 8 Battery).

Using a drone is easy but controlling a drone is a tough job that’s why a transmitter is needed. You can’t fly a multirotor without it because it uses radio signals to send commands wirelessly to a Radio Receiver. And Flysky is one of the popular brands that only manufactures a Diverse Range of high-quality Transmitters and Receivers at an affordable price.

Flysky CT6B 2.4 GHz 6CH transmitter is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver .it is ideal for quadcopters and multirotor that require the 6ch operation.

FlySky Transmitter and Receiver is gaining so much popularity due to its originality and compatibility in high-end drone projects and  Industrial people are interested in this type of  Transmitter.

Features : 

1. Super active and passive anti-jamming capabilities.
2. Very low power consumption.
3. High receiving sensitivity.
4. 8 model memory, digital control.
5. We can program by PC with the included software.
6. Full range 2.4GHz 6-channel radio.
7. 4 Types (Airplane, Heli90, Heli120, Heli140).
8. Use a linear spread of fine paragraph by an excess antenna.
9. It covers the entire bandwidth of the antenna bandwidth range.
10. High quality and stability.

Package Includes :

1 x Flysky CT6B Transmitter

1 x FS-R6B Receiver

1x USB Interface Cable

1 x Software CD

1 x Receiver Binding Cable

1x User Manual

1. Operating Voltage (VDC):12
2. No. of Channels:2
3. Antenna Length (mm):26
4. Certificate: CE
5. Charging Port: Yes
6. Code Type: Digital
7. DSC Port: Yes(3.5mm)
8. Modulation Type:GFSK
9. RF Power:Less Than 20 dBm
10. Sensitivity (dBm):1024

When using a drone, a transmitter is one of the most important components. You can’t run any car/Boat without it because it uses radio signals to send commands wirelessly to a Radio Receiver, which is connected to an RC car that is being remotely controlled.

FlySky FS-GT2 2.4GHz 2 Channel Digital Transmitter and Receiver Radio System. With many functions and features designed with the racer in mind, while still being easy to use, you are sure to be impressed with what the FS-GT2 has to offer. And this Transmitter works between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points.

Sometimes we receive the transmitter in Black Color instead of Orange Color from FlySky. 95% of the GT2 is in Orange & Black Color. Only a very limited GT2 is in Black, so we will ship randomly.

1. Very low power consumption.
2. High receiving sensitivity.
3. Super active and passive anti-jamming capabilities.
4. Super active and passive anti-jamming capabilities.
5. Use a linear spread of fine paragraph by an excess antenna.
6. It covers the entire bandwidth of the antenna bandwidth range
7. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points.
8. Has its own unique ID, increasing the anti-jamming capability and stability.

1 x FS-GT2 2.4G Radio Controller

1 x FS-GR3E  2.4G Receiver

1 x Bind Plug

1 x User Manual

When using a drone, the flysky transmitter is one of the most important components. It uses radio signals to wirelessly send commands to a radio receiver connected to the remote control RC car, so you cannot drive your car/boat without it.

FlySky FS-GT2 2.4GHz 2 Channels Digital transmitter and receiver radio system. Equipped with many functions and features designed specifically for racers, yet easy to use, there is no doubt that you will be impressed with what the FS-GT2 has to offer. This transmitter operates between 2.400GHz and 2.4835GHz frequencies divided into 160 frequency points.

Note: FlySky may show the transmitter as black instead of orange. 95% of GT2 is orange and black. Only a very limited GT2 is black and will be shipped randomly.

Also check our wide range of  flight controllers , Drone transmitter and receiver and other good quality drone parts .

1. Very low power consumption.
2. High receiving sensitivity.
3. Has its own unique ID, increasing the anti-jamming capability and stability.
4. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points.
5. Super active and passive anti-jamming capabilities.
6. Super active and passive anti-jamming capabilities.
7. It covers the entire bandwidth of the antenna bandwidth range
8. Use a linear spread of fine paragraph by an excess antenna.
9. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points.

When using a drone, the transmitter is one of the most important components and flysky is one of the best. Your multirotor will not fly without it, as it uses radio signals to wirelessly send commands to a radio receiver connected to your RC airplane or multirotor.

This is a FlySky FS-i6 2.4G 6CH PPM RC transmitter and his FS-iA6B receiver. The perfect entry-level radio for those just getting started flying drones.

Best of all, you get a slim, modern radio transmitter that fits comfortably in your hand and weighs just under 400 g. Arm endurance is not tested on long flights. This radio is also very convenient with a 3-position switch. There are two adjustable knobs for flight modes/multiple flap positions.

This kit comes with a new receiver FS-iA6B. This is a compact 6-channel receiver with an added range of over 500 m. Comes with dual antennas for excellent reception and interference rejection.

When binding, because each transmitter has a unique ID. The receiver remembers this ID and only accepts data from this sender. This prevents other transmitter signals from being picked up, greatly reducing interference and increasing safety.

Also check our wide range of  flight controllers , Drone transmitter and receiver and other good quality drone parts .

1. Entry-level 6 channel 2.4GHz radio with telemetry capability.
2. Dual Rate/Trims/Gear/Flap/Gyro Gain Adjust/Flight Mode/Throttle Hold/Hover Pitch Switches.
3. Easy to use Programming & Navigation Buttons.
4. Supports Heli/Standard Wing/Elevon/V-Tail.
5. 20 Model Memory.
6. 8 Character Model Name.
7. Trainer and charging ports.
8. The backlight LCD screen displays real-time transmitter and receiver voltage.
9. 4 Stick Mode Selectable.
10. Mode 2.
11. It comes with a receiver.

1. Model Type: Glider/Heli/Airplane
2. Band: 142
3. 2.4ghz System: AFHDS 2A and AFHDS
4. Code Type: GFSK
5. DSC Port: PS2;
6. Output: PPM
7. Charger Port: No
8. ANT length: 26mm*2(dual antenna)
9. Online update: Yes
10. Certificate: CE0678,FCC
11. Model Memories: 20
12. Channel Order: Aileron-CH1, Elevator-CH2, Throttle-CH3, Rudder-CH4, Ch 5 & 6 open to assignment to other functions.

1. Channel: 6.
2. Frequency Range: 2.4055–2.475 GHz.
3. Band Width Number: 140
4. Transmitting Power: ≤ 20 dBm.
5. RF Receiver Sensitivity: 105 dBm.
6. 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system.
7. Encoding: GFSK.
8. Antenna Length : 2 x 26 mm (dual antenna).
9. Input Power : 4.0 – 8.4 VDC (2A).
10. Dimension : 47 x 26.2 x 15 mm
11. Weight: 14.9 gm.
12. Data Acquisition Interface: Yes.
13. Model Type : Airplane / Glider / Helicopter.
14. Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i10, FS-GT2E, FS-GT2G.